Application of Zinc wire in the flame zinc-spraying machine working principle

Thermal spraying technology at high temperature and low temperature of the largest application area.

This type of coating is divided into the following types: 1. The earlier surface completes relative work, raw material quartz sand, steel sand, sand. When the gas or liquid produced by the screw air compressor is carried by a high speed impact surface, the erosion wear occurs.

Pock of Essential iron. 2. The principle of high speed and steady flame zinc spraying machine, positive and negative cross. produce a spark. Spray on materials that need to be embalmed.

Can replace Electroplating.

Spraying zinc machine coating or insulating coating, as well as spraying zinc, spraying aluminum, anti-corrosion life-such coating is divided into the following:

(1) The special typical coating is zinc coating.The effect of spraying on brine can reach 10-20 years--zinc coating;

(2) The special typical coating is aluminum coating.Spraying effect on the bridge to adapt to the corrosion life can reach 10-15 years--aluminum coating;

(3) dedicated typical for art. Spraying effect on the adaptation of the art of anti-corrosion aesthetic effect can reach 10-15 years, the color unchanged.--Copper coating.

High-temperature oxidation resistance-this kind of coating against chemical or physical decomposition, metal anti-corrosion effect.This type of coating is divided into the following types:

(1) acting as a thermal barrier between parts and high temperature environment--Thermal spraying zinc coating;

(2) Exposure in the sun, will not affect the substrate resistance to high temperature oxidation-high temperature oxidation coating (3) Protection of the substrate exposed to a hot corrosive gas.

Typical coating for copper--heat-resistant corrosion coating zinc wire